Browin 330123 Smoke generator for smoker, with pump 3.8/4 W and removable fill tube, for cold and warm smoking, Silver

A smoke generator is an auxiliary device in cold smoking and warm/hot smoking that can be used in any kind of smoker. Using it ensures excellent quality and efficiency of the process. Easy assembly and disassembly, as well as intuitive operation, make the smoking process a pure pleasure. The set is accompanied either by a black pump with power of 4 W and efficiency of 2x4.5 L/min or a green pump with power of 3.8 W and efficiency of 2x200 L/h, chosen at random. The choice has no impact on the functionality of the smoke generator. Tip - which smoking method to choose? Smoking methods: cold smoking warm/hot smoking smoking with roasting (characteristic for BBQ). Cold smoking: It usually takes place in the temperature of up to 25⁰C and takes from several hours to 14 days. The smoke density used depends on the needs. This method of smoking is used mainly for products that are supposed to be stored for a long time or matured, as the smoke penetrates the product deeply and preserves it slowly. The products smoked using this method dry uniformly. It also provides excellent results in the case of long-term maturing. Warm/hot smoking: It consists in using smoke with temperature of more than 25⁰C on the product. Here we can distinguish two upper temperature limits adopted – smoking up to about 45⁰C is called warm smoking, and up to 60⁰C - hot smoking. In case of hot smoking, the products inside the smoker can be roasted by raising the temperature in the smoking chamber even up to 80-90⁰C. Smoking with roasting: In case of roasting, we recommend disconnecting the smoke generator and processing the products using temperature only. Irrespective of the type of smoking you select, remember that it is the final process, and the basis consists in properly preparing the products for smoking and drying them very well prior to it (or, alternatively, additionally drying them in the smoker). It is a crucial stage that has a positive impact on the quality of smoked products and prevents their acidification. Note: Remember to position the generator funnel feeding the smoke to the smoker in such a manner that the elongated opening of this funnel is directed downwards. The notch in the limiter plate and the protrusion on the fill tube will help you with that. After each smoking, the generator should be cleaned in order to make it fully ready for the next use. If the generator is not cleaned, it may lead to poor flow of the smoke.The kit includes: - lid with a wooden handle; - fill tube made of stainless steel 304; - 3.8 W electric pump; - generator nozzle consisting of two parts - smoke pipe and air pipe; - Ø5/4 mm silicone hose with length of 210 mm; - tee for connecting hoses; - Ø5/4 mm silicone hose with length of 820 mm; - adapter for connecting hoses - Ø5/4 mm silicone hose with length of 100 mm; - M8 stainless washer - 4 pcs; - M8x40 stainless bolt - 2 pcs; - M8 stainless nut - 2 pcs. Dimensions: Total height of the cylinder with lid - 32 cm cylinder height - 29.2 cm outer diameter - 10.1 cm wall thickness - 0.15 cm Note! The kit may include a black or green pump (chosen at random). In spite of certain minor differences, the pumps have the same function and have no impact on the quality of using the kit.