Amewi 22553 AMXRacing RXB7 Buggy 1:7 4WD RTR Black

Super Scale Dune buggy in 1:7 scale with the finest features and a final speed of up to 130 km/h (optional with 8S LiPo). The RXB7 combines very high-quality components with an extreme drive concept and top equipment such as 2 x 3S LiPo batteries included, a high-quality and precise 2.4 GHz remote control, a LiPo charger and many milled aluminium parts. A handbrake controllable via the transmitter, which allows the vehicle to drift perfectly in curves on dusty slopes, is only a highlight of this brachial pushchair. The impermeable power of the 4282 brushless motor with a specific speed of 2000 KV is sensitive controlled via a 150 A controller and is distributed by steel cardan shafts and the differentials and from there via steel CVD drive shafts to the 4 wheels (4WD). The strong steering servo with metal gear and an operating force of 25 kg always ensures maximum performance and a very direct response of the steering on any surface. The two shock absorber bridges, the suspension arm holder, steering lever and C-hubs as well as the chassis braces are CNC machined from high-quality aluminium. The chassis plate is made of solid 4 mm thick aluminium and ensures perfect rigidity of the chassis. Main gear and differential gear gears are made of steel and guarantee a long service life. All gear parts are CNC milled for the highest accuracy of fit. To prevent overheating, both the motor and the 150A brushless controller are equipped with fans which counteract the heat generation during the journey. The mechanical brake of the model is controlled with a 15 kg metal gear servo and this can be used in addition to the electric brake of the regulator to bring the model to a perfect drift angle. In addition to the fully adjustable chassis, the massive oil pressure shock absorbers ensure a very good balance of the vehicle and the perfect grip level of the specially developed 165 mm tyres. The beautiful body of the model made of sturdy polycarbonate is also visually an absolute cream piece, which gives the model a very aggressive and off-road typical look. The RXB7 is equipped with an LED lighting system, which can not only be switched on and off via the transmitter, but also allows different lighting modes. A very bright light strip on the roof of the buggy ensures perfect illumination of the road. Highlights: CNC machined steel gears - For best performance, durability and power transmission, the gear parts of the HC7 are CNC machined from high-strength steel. 150 A ESC - for sensitive control of the 2000 KV brushless motor, a brushless regulator is specially programmed for the vehicle. Complete servo-controlled brake system (handbrake). Other features: solid, torsion-resistant 4 mm aluminium chassis - for stable driving behaviour. Front and rear shock absorber bridges made of CNC machined aluminium. Double Frame strstrstrstrstrstrAluminium. High-quality and hardened CVD drive shafts made of steel. All gear parts are made of high-quality steel. CNC milled axle and steering lever made of milled aluminium. Vehicle fully ball bearings. The suspension front and rear can be easily and precisely adjusted and optimised for different surfaces. Water-protected receiver box tyres with perfect rubber compound for race and drift suspension arm holder made of milled aluminium for maximum durability. Brushless high-performance motor with 2000 KV and double fan. High performance controller with 150 A and XT90 connection. 2 x 3S LiPo battery with 5000 mAh and XT90 connection. Metal gearbox servos for steering and handbrake. High-quality 4 channel. 2.4GHz Remote control with maximum range and sensitive control. Technical data: scale: 1:7. Length: 680 mm. Width: 380 mm. Height: 225 mm. Weight: approx. 6.2 kg. Wheelbase: 419 mm. Front track width: 330 mm. Rear width: 320 mm. Ground clearance: 55 mm. Front wheels: outer diameter/width: 165 / 63 mm. Rear wheels: outer diameter/width: 165 / 63 mm. Wheel diameter: 90 mm. Gears: steel. Gear ratio: 15:1 front shock absorber: 102 mm. Rear damper: 1 mm. Rear damper: 02 mm brakbrakbrakElectronic and brake disc via 15 kg metal transmission servo controlled controller: 150 A ESC with XT90 connection motor: 4282 brushless motor with 2000 KV drive system: universal shaft made of metal. Steering servo: standard servo with metal gearbox and 25 kg operating force. Main material: metal. Battery compartment dimensions: 140 x 45 x 5 mm Battery: 2x LiPo, 3S, 11.1V, 5000mAh 35C, Softcase XT90 plug (L x W x H): 136x43x27mm Weight: 340g Driving time: approx. 10-15 min. Maximum speed: up to max. 130 km/h (with 2 x 4S LiPo batteries optional) Remote control: 4 channel 2.4 GHz remote control range: max. 400 m charger: BX3 balancer charger 220 V. Charging time: per battery approx. 3 - 4 hours. Box contents: model transmitter 2x battery 3S LiPo charger decorative sheet instructions DE/EN required accessories: 4x 1.5 V AA batteries for the transmitter Safety Warning Please note: Not suitable for