Village Green Ready to Use Wood Stain - Water Based, Eco Friendly, Premium Quality (French Grey, 250ml)

Village Green Wood Stain is a premium quality, non-toxic, odour free wood stain, for interior and exterior use, that will enhance your wood with a colourful vibrance that brings it to life. Rich and deep, light and exuberant, modern or traditional; tones and shades that will suit your style and personality. PREPARATION: Ensure that the surface is clean, dry and free from dirt and dust and any previous finish. If sanding, the wood should be sanded with the grain, using 150 – 220 grit abrasive paper. APPLICATION: SHAKE WELL BEFORE USE. Application may be by brush, roller, applicator or lint free cloth. For the best results, apply the lightest coats possible, wiping off any excess, working quickly along the wet edge. Using this method, you may require multiple coats, but you can control the colour depth to perfect your finish. Allow your wood to be dry to the touch before applying additional coats. Drying time is generally 15 mins – 1 hour. Clean up with soap and water. FINISH: Allow 24-48 hours for the stain to fully dry before applying a finish. You can finish your stained wood using a wax, oil, varnish or lacquer. COVERAGE: 12-15 square metres per litre on sanded wood (7-10 square meters on rough sawn timber). Although our stains are always thoroughly tested for colour consistency, the perceived colour of the stain once applied may vary depending on the qualities of the wood you are applying it to and the method of application. Viewing colours via screen will also alter the perceived colour of a colour swatch. For this reason, we always recommend to try a 50ml sample bottle from our ready to use range prior to purchasing a larger quantity. We also sell our stain in concentrate form for larger jobs. For more info, news, photos, tips & tricks, please like and share our Facebook and Instagram pages. Just search Village Green Wood Stains. Please also check out all images on this listing to show what these stains can achieve. Directions PREPARATION: Ensure that the surface is clean, dry and free from dirt and dust and any previous finish. If sanding, the wood should be sanded with the grain, using 150 – 220 grit abrasive paper. APPLICATION: SHAKE WELL BEFORE USE. Application may be by brush, roller, applicator or lint free cloth. For the best results, apply the lightest coats possible, wiping off any excess, working quickly along the wet edge. Using this method, you may require multiple coats, but you can control the colour depth to perfect your finish. Allow your wood to be dry to the touch before applying additional coats. Drying time is generally 15 mins – 1 hour. Clean up with soap and water. FINISH: Allow 24-48 hours for the stain to fully dry before applying a finish. You can finish your stained wood using a wax, oil, varnish or lacquer. COVERAGE: 12-15 square metres per litre on sanded wood (7-10 square meters on rough sawn timber).