JOHO Thermostatic Shower Mixer Tap with Thermostat, Shower Thermostatic Mixer Tap with 38 °C Safety Button, Chrome Round

Intelligent temperature control: the thermostat tap with original Sedal thermostat cartridge from Spain with 38°C safety lock keeps the set ideal temperature and reliably prevents the water from getting too hot or too cold. Safe to use even for children and the elderly.

Comfortable shower experience: this mixer tap output temperature range: 20-50°C, safety button temperature: 38°C. The temperature can only be increased by pressing and holding the button on the thermostat handle. This prevents accidental regulation.

Easy to install: Attractive thermostatic tap with 2 handles and hose connection G1/2 inch, axle spacing 150 ± 15 mm, must ensure that hot to the left and cold to the right. Flow rate: for a water pressure of 3 bar, 12 l/min. For the best performance of this thermostat, we recommend a water pressure of 1.0 - 5.0 bar.

Wide range of applications: our thermostat is for use with electric storage heaters, boilers, spas, accumulators. The standard of the natural gas instantaneous water heater must be larger than 12 L, as well as solar energy instantaneous water heater must have its own manual or automatic water Air energy instantaneous water heater must heat fuse larger than 12 L.

Please note: make sure that the hot water connection is on the left and the cold water connection is on the right. This is very important for the installation of our thermostatic fitting. Our shower tap cannot be used on inverted hot-cold water connection. The warranty does not refer to the wear/damage of the products due to use. If you have any problems during use, please feel free to contact us, we are at your disposal at any time!