LANERI Acrylic Abs Shower Tray Reinforced with Fiberglass and Polyester Resin (70X70 Squared)

ABS shower tray, made of acrylic mould, reinforced with vertical and horizontal reinforcement bars drowned on resin and polyester fiberglass. The minimal design and low height make it a practical, beautiful and elegant product. Varied sizes and versions (square, rectangular, curved and asymmetrical semicircular) H 5 cm. The finish is smooth and the edges are finished on the 4 sides, making the plate reversible to suit any need during assembly. The edges are approximately 7 cm thick. The drain is included in the price and is 90 mm in diameter. The shower tray is supplied protected by a clear film to protect against surface scratches. Make sure to remove it before use. Technical characteristics Brand: LANERI Made of reinforced abs and finished on 4 sides, lower reinforcements drowned in resin Smooth surface, the plate is not slippery as the glazed ceramic Transparent film (to be removed) to protect from scratches throughout the surface. Height 5 cm, lowered shower tray does not yellow over time drain 50 lt/min reduced weight compared to the ceramic does not damage or deforms over time over time. Suitable for almost all corrosive products of acidic or basic nature Drain waste included in the price and supplied with the shower tray Dimensions waste: 7 cm Flush installation or traditional mounting on a mortar or on a finished floor Glue with tile glue type H40 Kerakoll or similar class C2 VAT price included 22% , free shipping and guaranteed 24 months warranty Against vines. Product slices.