Tamiya 54965 TT-02S Aluminium Steering Set Tie Rods Long Accessories for Remote Controlled Car Part RC Model Making

Aluminium steering bridge (long handlebars), aluminium steering arms, adjustable tie rods with hexagon, 2 x 38 mm threaded rods, 1 x 42 mm threaded rod, compatible with the TAMIYA TT-02 Type-S chassis Directions 1. Remove the existing guide bridge and rail rods from your TAMIYA TT-02S case. 2. Use the included hex keys to move the rail bars to the desired position. 3. Attach the new rail bars to the chassis. 4. Use the new aluminium guide bridge and attach it to the chassis. 5. Check that all parts are properly attached and the groove rods are adjusted. 6. Place your RC car on a flat surface and test it to ensure it works properly. Safety Warning WARNING: Before you start assembling, you should have read and understand all instructions. If a child assembles the model, a supervising adult should also have read the building instructions. Tools including knives are used when assembling the kit. Special care must be taken to avoid injury. If you encounter difficulties during assembly, ask an adult who supervises the work or a model maker with RC experience or specialist dealer. Only use tools for purpose. If used incorrectly, there is a risk of injury. If you use paints and/or glue (not included in the kit), follow the instructions provided there. Keep kit away from small children. Prevent children from putting any components in their mouth or pulling plastic bags over their heads.