ACCOSSATO PK038N-L-20-NRST Forged Clutch Pump19X20 with Integrated Tray, Long Jointed Pomello, Aluminium CNC Machine, Grey Body with Black Lever

Accossato radial clutch pump with integrated tray is recommended for road use. The pump body is made of aluminum fover, the lid and lever are CNC machined. The diameter of the piston is 19 mm. The wheelbase is 20 mm: it is the most ready version as the lever stroke is shorter. With the same force exerted on the lever, the greater distance between the fulcrum of the lever and the axis of the pumping, increases the force necessary for braking. Not recommended for road use. The lever is available in 7 colors and articulated, long, with the lightening loop (RST) or without a buttonhole (NRST). The adjustment knob and tray lid are the same color as the lever. On the tank there is an indicator to check the amount of oil in it. The radial pump is entirely made in Italy; the screws are made of stainless steel, the purge valve is in galvanized steel and the gaskets are made with compound coming from Formula 1. The fixing bolt is offset, so as to reduce the bending of the pump during braking. Each component is designed to guarantee the end user the reduction of the passive braking section: by pulling the lever, the gap between when starting to operate the lever and the moment of braking itself is reduced by more than 50%, compared to any other radial pump. The thread pitch for the brake hose attachment is M10x1. Stop light switch is not included and can be ordered under ID001 or ID002. It is possible to buy separately the mirror holder, obtained CNC, with the codes MH009 or MH010.