Cookology 35cm Island Cylinder Cooker Hood & Kitchen Extractor Fan Carbon Filters (Stainless Steel)

Installation: This Hood gets attached to your ceiling, by fixing a steel plate to a joist from which the hood will hang. Angled bars are then attached to the hood itself at the desired height and inside both chimney sections. After you have connected the plug and ducting (if venting outside) you simply bolt the angled bars to the ceiling plate. Finally you slide the top chimney section up to the ceiling plate thereby covering the fixtures. Minimum Height: Without modification the minimum height is 990mm You can achieve a minimum height of 750mm by cutting the bottom of the top chimney section. However, any cut items cannot be returned Island Hood features: UK 13amp Plug 192W Motor Push button control operation 3 speeds 1 washable stainless steel & aluminium grease filter 2 x 1W LED light strips Powerful Extraction capacity: 750 m3/hr Type of extraction: Extraction outside possible with 150mm ducting kit like the DK1M150 (not included) Recirculation back into kitchen possible with CCF200 filters (included) Technical details: Minimum distance from gas hob: 700 mm Minimum distance from electric hob: 650 mm Maximum extraction power: 750 m³/h Number of speeds: 3 Type: Island Filtering: Grease filter Number of filters: 1 pcs Weight & dimensions: Width: 350mm Depth: 350mm Height: Please see the technical diagram for more details under images Performance: Energy rating: C Motor power: 64.4 kWh/annum Air flow rating: C Light efficiency: A Grease filter efficiency: C Noise: 72dB