Pferd HM milling bit, Round arc Shape RBF, All-Round Teeth, milling pin ø 12 mm, Shaft ø 6 mm, Length 65 mm, 21001032 – for Versatile use on The Most Important Materials Used in Industrial use - Image 1

£42.65

PFERD Pferd HM milling bit, Round arc Shape RBF, All-Round Teeth, milling pin ø 12 mm, Shaft ø 6 mm, Length 65 mm, 21001032 – for Versatile use on The Most Important Materials Used in Industrial use

Name: Pferd HM milling bit, Round arc Shape RBF, All-Round Teeth, milling pin o 12 mm, Shaft o 6 mm, Length 65 mm, 21001032 - for Versatile use on The Most Important Materials Used in Industrial use
Brand: PFERD
Price: 42.65 GBP
Availability: InStock

Round Arch Shape, 21001032

Burrs

About as cheap as it gets. The only time it was cheaper was 2 months ago.

£43 today · all-time low £41 (May 2026) · usually £43

NEW HERE?

Amazon shows you one price. We show you all of them.

Tosheroon watches Amazon prices so you don't have to. Every product on Amazon has a price history — we make it visible. Set the price you'd actually pay, and we'll email you the second it gets there. No app, no account, one email.

WHAT'S ON THIS PAGE

↓ Price chart
when this has been cheap or pricey

↓ Forecast
where the price is heading next

↓ Statistics
all-time high & low, recent range

↑ Price alert
name your number, we'll email you

Price History & Forecast

Grey patches = out of stock. Cheaper = lower on the chart. Hover for exact prices.

Last 65 days · 65 data points (no recent data)

Historical

Generating forecast…

Price Distribution

Price distribution over 65 days • 3 price levels

Days at Price

Current Price

Price Analysis

Most common price: £42 (36 days, 55.4%)

Price range: £41 - £43

Price levels: 3 different prices over 65 days

Key Features

Round arched milling bit All-round for versatile use on the most important materials such as steel, cast steel, stainless steel (INOX), non-ferrous metals and cast iron

The all-round teeth are characterised by up to 30% higher cutting performance on steel compared to conventional cross-toothed router bits

The innovative teeth allow you to work comfortably with reduced vibrations and less noise

Thanks to a very high removal rate, these carbide burrs are characterised by a noticeable time saving and high economy

Box contents: 1 x Pferd carbide milling bit round arch shape RBF / serration all-round / milling pin diameter 12 mm, shaft diameter 6 mm, total length 65 mm, toothed length 25 mm

Product Specifications

Brand: PFERD
Model: 21001032
Colour: Round Arch Shape
Size: Hm-frässtift
ASIN: B07X4JN74V
Category: DIY & Tools > Power, Garden & Hand Tools > Power Tool Accessories > Burrs
Domain: Amazon UK
Listed Since: 27 September 2019

Barcode

No barcode data available

PFERD Pferd HM milling bit, Round arc Shape RBF, All-Round Teeth, milling pin ø 12 mm, Shaft ø 6 mm, Length 65 mm, 21001032 – for Versatile use on The Most Important Materials Used in Industrial use

About as cheap as it gets. The only time it was cheaper was 2 months ago.

Price History & Forecast

Price Distribution

Price Analysis

Key Features

Product Specifications

Barcode

Similar Products You Might Like

PFERD HM milling bit Set, 3 Pieces, All-Round Teeth, Shaft Diameter 6 mm, milling bit Diameter 6 mm, 21901406 - for Versatile use on The Most Important Materials

PFERD HM milling bit, Flame Shape B, All-Round Teeth, milling bit Diameter 8 mm, Shaft Diameter 6 mm, Length 60 mm, 21001015 - for Versatile use on The Most Important industrially Used Materials

PFERD HM milling bit Set, 3-Piece, All-Round Teeth, HICOAT Coating, Shaft Diameter 6 mm, milling bit Diameter 12 mm, Toothed Length 25 mm, 21901415 - for Versatile use on The Most Important Materials

Pferd 21901506 Carbide Abrasive Pencil Set 1506 HM

PFERD HM Router Bit Set, 10 Pieces, Micro Tooth, Shaft Diameter 3 mm, 21901502 – for Finishing on Almost All Materials up to 68 HRC

PFERD 21901306 HM-Frässtift-Set 1306 Micro Burr

PFERD HM Burr Set, 5 Pieces, INOX Tooth, Shaft Diameter 6 mm, 21901912 - Specially Designed for Stainless Steel (INOX)

PFERD HSS Burr Set, 3 Pieces, Teeth 3, Diameter 12 mm, Shaft Diameter 6 mm, 22900811 - Universal for Steel, Cast Steel and Cast Iron

PFERD HSS Burr Set, 10 Pieces, Tooth 3, Shank Diameter 6 mm, 22900813 - for Cutting Steel, Cast Steel and Cast Iron

PFERD HM milling bit Set, 3 Pieces, All-Round Teeth, Shaft Diameter 6 mm, milling bit Diameter 12 mm, 21901414 - for Versatile use on The Most Important Materials

PFERD HSS Burr Set, 15 Pieces, Special Toothing, Shaft Diameter 3 mm, 22900845 - for Fine Cutting in Small and Hard-to-Reach Areas

Pferd 21901512 Carbide Grinding Burr Set

PFERD HM Router Bit Set, 5 Pieces, Steel Tooth, Shank Diameter 6 mm, 21901812 - Specially Designed for Steel and Cast Steel

PFERD 39009704 Sanding Disc 200 x 32 x 51 mm High-Speed Steel Grain Size 80 White Corundum – Sanding Disc for Processing High-Alloy Steels with Integrated Reducing Sleeve (32 mm)

PFERD HM Router Bit Set, 5 Pieces, Aluminium Tooth, Shaft Diameter 6 mm, 21901612 - Specially Designed for Aluminium Machining

Pferd HM Burr Cylinder Shape ZYAS with Forehead Teeth, Allround Teeth, Burr Diameter 12 mm, Shaft Diameter 6 mm, Length 65 mm, 21001003 – for Versatile use on The Most Important Materials

PFERD Carbide Burr Set, 10 Pieces, Aluminium Toothing, Shaft Diameter 3 mm, 21901603 - Specially for Machining Aluminium

Pferd bw – 25032-51 cn 80 Carbon Wheel

RUKO Tungsten Carbide Totary Burr Set in Mini-Box, Bright Finish, 5 Pieces, R116004

PFERD Carbide Abrasive Disc, 200 x 25 x 51 mm, SiC 80, 39009727 - Soft, Aggressive Sanding Disc for Hard Materials, e.g. Carbide, with Reducing Sleeve (32 mm)

PFERD 300mm x 40mm x 40mm Silicon Carbide (CN) Grit 80 Soft Bonded Abrasive Wheel for Angle Grinder, Die Grinder

TiCN Carbide end Mills, G Shape, with Pointed arc, Ideal for Precision Machining and obtaining fine finishes.

Pferd 61340125 X-Lock Performance Line SG Steelox Cutting Disc

Pferd bw – 25032-51 an 60 Universal Wheel