Waveshare 7.8inch E-Ink Display HAT for Raspberry Pi 1872×1404 Resolution E-Paper IT8951 Controller USB/SPI/I80 Interface Supports Partial Refresh for Ebook Reader

Overview This is an E-Ink display HAT for Raspberry Pi, 7.8inch, 1872×1404 resolution, with embedded controller IT8951, communicating via USB/SPI/I80 interface, supports partial refresh. Due to the advantages like low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as ebook reader, e-ink display, industrial instruments, and so on. Features No backlight, keeps displaying last content for a long time even when power down Low power consumption, basically power is only required for refreshing Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards USB/SPI/I80 interface, for connecting with host boards like Raspberry Pi/Nucleo, etc. Comes with development resources and manual (examples for Raspberry Pi/STM32) Specifications Operating voltage: 5V Interface: USB/SPI/I80 Outline dimension: 173.8mm × 127.6mm × 0.78mm Display size: 158.184mm × 118.638mm Dot pitch: 0.0845mm × 0.0845mm Resolution: 1872 × 1404 Display color: black, white Gray scale: 2-16 (1-4 bit) Full refresh time: 450ms Total refresh power: 1.2W(typ.) Total standby power: 0.1W(typ.) Viewing angle: >170° Wiki : www.waveshare.com/wiki/7.8inch_e-Paper_HAT?amazon PACKAGE CONTENT 7.8inch e-Paper x1 e-Paper IT8951 Driver HAT (B) x1 7.8inch e-Paper Adapter x1 33PIN FFC (same side contact) x1 RPi screws pack (2pcs) x1 PH2.0 20cm 8Pin x1 USB type A plug to micro B plug cable x1