STANLEY SXUP750PTE Submersible Pump for Clear and Dirty Water (750 W, Max. Flow Rate 13,500 l/h, Max. Head 8 m)

SXUP750PTE is a submersible pump and designed to water from flooded areas, e.g. pump excavations within construction sites, ponds, shafts, ditches, cisterns, garages, basements, fountains and swimming pools. The folding feet allow you to change the suction mode from clear water to dirty water: for clear water, the feet can remain closed, but for dirty water they can be opened so that any contamination can pass. In order to operate it you will need to: Connect a 25mm (1"), 32mm (1 ¼") or 38mm (1 ½") pressure hose (not supplied) to the universal connector; submerge the pump, position it on the floor or bottom of the container to be emptied and connect to the mains supply. As soon as the float switch moves up due to the existing water, the pump automatically starts pumping operation to empty the room or basin to the desired water level (the minimum residual water level is 5 mm with the feet closed and 30 mm with the feet open). The maximum immersion depth of SXUP750PTE is 7 m, while the maximum possible water pump height is 8 m. If the device is used for pumping clear water, it should be ensured that the water is not contaminated with dirt, debris and particles with diameters over 5 mm; when used for dirty water, the diameter of the solid impurities must not exceed 30 mm.