TB ® Replacement For A1278 A1286 A1297 13 15 17 Bottom Case Foot/Feet 4pc + 10 Bottom Case Screws + Magnetic Screwdriver Kit Set

How to Replace 1. Remove the bottom case and peel adhesive remains up 2. Attach the feet to the base case with supper glue then put the inner feet on the supper glue and Press for a few of seconds Note 1. Screws at sides and front must be removed and installed at an angle.start with a good condition screwdriver (screwdriver blades & tip are not worn or bent) is nessary. Place the screwdriver tip into the screw like normal. Making sure the blades & tip of the screwdriver fit into the head slots in the screw as best as possible (considering that the slots in the screw are messed up).use something like a small hammer (or other heavy object)...and as firmly as you dare...tap on top of the screwdriver (do not allow the screwdriver to move while tapping it). 2. The adhesive on the Rubber Feet are not strong enough to stick the feet. Glue is required to properly install Rubber Feet as suggested by Supper glue contains ethyl cyanoacrylate. Avoid contact with skin and eyes. 3. Feet Set is a little harder and thinner than the one. Note: Not for retina series. Package includes: 1 x Magnetic Screwdriver 10 x Bottom screws 4 x Bottom feets Applicable models: 13\" A1278 2009 2010 2011 2012 15\" A1286 2009 2010 2011 2012 17\" A1297 2009 2010 2011 Compatible Model No MB466LL/A, MB467LL/A, MB467LL/A, MB991LL/A, MC374LL/A, MC375LL/A, MC700LL/A, MD313LL/A, MC724LL/A, MD314LL/A, MD101LL/A, MD102LL/A, MB470LL/A, MB471LL/A, MC118LL/A, MC026LL/A, MB985LL/A, MB986LL/A, MC371LL/A, MC372LL/A, MC373LL/A, MC721LL/A, MC723LL/A,