Fluance PA10 High Fidelity Phono Preamp (Preamplifier) with RIAA Equalization for MM Turntables/Vinyl Record Players

Savor the ultimate listening experience by pairing a fully loaded high fidelity turntable with endlessly versatile, room-filling 90-watt powered bookshelf speakers Packed with high performance components including an Ortofon 2M Blue Cartridge, servo motor, solid wood plinth, 3-point vibration isolation feet, S-type precision tonearm to provide a pure analog sound With an integrated 90W Class D amplifier, 1 inch silk dome tweeters and 5 inch high performance woven drivers, these active speakers deliver stunning acoustic accuracy Precisely converts the turntable phono signal to line level, featuring an ultra high-accuracy frequency response to faithfully reproduce the original recording to the RIAA standard Easily switch between your vinyl records and streaming your favorite music apps through Bluetooth with this simple plug and play setup – no separate amp required Audio Specifications ▼ Audio Circuit Type Passively Equalized RIAA Compatible Stylus MM Gain 38 dB Phono Input Sensitivity 30 mV Total Harmonic Distortion (THD) 0.004% RIAA Equalization Accuracy (deviation) 20 Hz - 20 kHz +/- 0.5 dB Signal/Noise (S/N) Ratio > 90 dB Crosstalk > -86 dB Input Impedance 47 kohm Input Load Capacitance 100 pF Output Impedance 100 ohm Output Voltage 2.2 V Maximum Input @ 1 kHz 100 mV Maximum Phono Stage Output 125 mV High Pass Filter Cutoff 20 Hz Dynamic Range > 85 dB Input/Output Specifications ▼ Input RCA L/R (Gold Plated) Output RCA L/R (Gold Plated) Ground Terminal Yes Cabinet Specifications ▼ Cabinet Material MDF Finish PVC Wood - Black Power Specification ▼ Power Input 110 V - 240 V ~ 50/60 Hz 0.5 A Power Adapter Output 24 V, 500 mA Power Consumption 0.4 W General Specifications ▼ Dimensions 4(L) x 2.25(H) x 3.6(D) inches (101.5 x 57.1 x 91.5 mm) Weight 11.5 oz (325 g) Operating Temperature -5°C - 45°C NOISE FLOOR (UNWEIGHTED) <220 uV Compatible With Fluance RT80, RT81, RT82, RT83, RT84, and RT85 turntables as well as any turntables that are equipped with a Moving Magnet cartridge What's Included PA10 Preamplifier Lineout Click to Expand PA10 Unit Power Adapter User Manual Fluance Catalog Lifetime Customer Support 2 Year Manufacturer’s Warranty UPC 061783269794 Length 3' Compatible With RT80, RT81, RT82, RT83, RT84, RT85, PA10 UPC 061783269053 What's Included 3 Foot Premium Grade RCA Audio Cable Lifetime Customer Support 2 Year Manufacturer’s Warranty Cabinet Specifications ▼ Cabinet Material MDF Finish Matte Bamboo Real Wood Veneer Dust Cover Yes - Tinted Turntable Specifications ▼ Drive System Belt Drive Motor DC Motor with Servo Controller Analyzes motor speed 500 times/sec Motor Isolation Under-mounted 7-point silicone isolation with decoupling isolation ring Speed 33 1/3 RPM, 45 RPM (78 RPM - No) Speed Variation 0.13% Wow and Flutter 0.07% Signal-to-Noise Ratio (Weighted) 76 dB Signal-to-Noise Ratio (Unweighted) 65 dB Platter Aluminum Diameter of Platter 12 inches (30 cm) Weight of Platter 1.22 lbs (553 g) Height of Platter 0.62 inches (16 mm) Auto-Stop Yes Turntable Mat Rubber Tonearm Specifications ▼ Tonearm Type Static Balanced, S-Type Supported Cartridge Weight 0.18 – 0.25 oz (5.0 – 7.5 g) Counterweight Yes – 3.60 oz (102 g) - Adjustable Anti-skating Adjustment Yes – Adjustable Pivot Bearing Yes Cueing Lever Yes Tonearm Material Aluminum Tonearm Wire 36 AWG Litz Cable / 7 Strand Effective Tonearm Mass 0.97 oz (27.5 g) Overhang 0.76 inches (19.2 mm) Effective Tonearm Length 8.82 inches (224 mm) Headshell Mount H-4 Bayonet Mount Cartridge Specifications ▼ Cartridge Type Moving Magnet (MM) Cartridge Model Ortofon: 2M Blue Replacement Stylus Stylus 2M Blue Stylus 0.3 x 0.7 mil Cantilever Aluminum Mount Half-inch Frequency Response 20 - 20,000 Hz (+2/-1 dB) Frequency Range 20 - 25,000 Hz (-3 dB) Channel Separation 25 dB at 1 kHz Channel Balance <1.5 dB @ 1 kHz Load Impedance/Capacitance 47k Ohms/150 - 300 pF Output Voltage 5.5 mV Cartridge Weight 0.25 oz (7.2g) Headshell Weight 0.35 oz (9 g) Cartridge Height 0.71 inches (18 mm) Recommended Tracking Force 0.06 - 0.07 oz (1.6 - 2.0 g) Vertical Tracking Angle 20° Rubber Belt Specifications ▼ Rubber Belt Design Continuous loop (joint-less) Width 0.17 inches (4.5 mm) Length 36.02 inches (915 mm) Thickness 0.02 inches (0.6 mm) Output Specifications ▼ Connector RCA (Gold-plated) Preamp No - Separate Phono Preamp Required Phono Output 5.5 mV Phono Bypass N/A Line Output N/A Ground Terminal Yes Power Specification ▼ Input 100 – 240 V AC (50/60 Hz) Output 12 V / 500 mA Consumption 1.5 W General Specifications ▼ Dimensions 5.5 x 16.5 x 13.75 inches / 14.0 x 41.9 x 34.9 cm (HxWxD) Certifications FCC CertifiedRoHSCUL/UL Unit Weight 14.99 lb (6.8 kg) Operating Temperature 41°F to 95°F (5°C to 35°C) Wireless Playback No (Requires Bluetooth or WiFi transmitter connected via RCA connection to transmit audio wirelessly) Fluance Speaker Size Comparison Chart Click to Expand UPC 871363001207 What's Included RT84 Reference Turntable Line Out Click to Expand RT84B Turntable Dust Cov