akYtec ITP16-G Temperature Gauge - Green

The ITP16 is a temperature display for monitoring and controlling industrial processes. This device has a compact, standardised design and fits into a 22.5 mm standard bore hole. The display has a digital output and a configurable analogue input. The device can process linear voltage signals, signals from various resistance thermometers (Pt100, Pt1000 and more) or thermocouples (K, J and more). The NPN transistor output can control a load up to 42V DC/ 200mA, which can implement a two-point control. This output can also be used as an alarm output. The ITP16 also supports an alarm function. The device requires a 24 V DC power supply. The housing offers protection class IP65 on the front and can be operated in the temperature range from -40 to +60 °C. Functions and features: - Measure and display the signal values of different resistance thermometers and thermocouples - Linear voltage signal scaling - Adjustable decimal point position - Display range -999... +9999 - Two-point control with an NPN output - Digital filter - Alarm function (flashing if set exceeds settings). Technical data: Power supply: 24 (10-30) V DC input: 1 sampling time, max. : 2.1m/s, Accuracy: (0.25% FS). Temperature influence: ≤ 0.2%/10°C. Input resistance: 0-1 V, -50... +50mV ≥ 250 kOhm Output: 1 type: NPN transistor load capacity: 200mA, 42V DC Case: Board installation, drawing height: 14 mm. Dimensions: 48 x 26 x 65 mm. Weight: approximately 30 g. Ambient temperature: -40 to +60 °C. Protection type: front IP65, rear IP20. Supported sensors resistance thermometer Pt50 Pt100 Pt500 Pt1000 thermoelements K J N T S R B A L linear signals -50 to 50 mV, 0-1 V