Eltako WSZ15D-65A AC Meter MID 230 V

Maximum current 65A, stand-by loss only 0.4 watts. Series installation device for mounting on DIN EN 60715 TH35 support rail. 1 division unit = 18 mm wide, 58 mm deep. Accuracy class B (1%). With S0 interface This AC meter measures the active energy by the current flowing between the input and the output. The actual consumption of only a maximum of 0.4 watts real power is not measured and not displayed. It can connect 1 outer conductor with a current up to 65A. The starting current is 4OmA. With a expected load of more than 50%, a ventilation distance of 1/2 division unit to adjacent devices must be observed. If applicable. Use the spacer DS12. Two N-terminals for secure cross wiring of multiple counters. The 7-segment LCD display can also be read twice within two weeks without a power supply. To do this, press the button. Below the display there is a button with which according to the instruction manual in the menu is faded. First, the backlight turns on. After that, the total active energy, the active energy of the resettable memory as well as the instantaneous values of actual power, voltage and current can be displayed. The power cover is displayed with a 1000 times per kWh flashing bar in the display. Error message: If there is a connection error, the backlight of the display will flash.