IKRA 73046560 Petrol Brush Cutter Trimmer IBF 43 with Thread Spool 3-Tooth Knife and Shoulder Strap 1.1 kW Grey/Red

The petrol powered brush cutter IBF 43 from IKRA has a thread spool with the designation DA-F16 (automatic tap/semi-automatic) and a 3-tooth thicket knife included. The thread thickness of the trimmer line is 2.4 mm. With the thread spool, you can perfectly trim grass blades and non-wooden plants, e.g. grass blades on lawn edges of fences and walls. With the sharp three-tooth knife disc, you can cut high grass, thicker scalp, thickets and woody weeds. Switching between thread cassette and knife is very easy. If you have installed the thread spool, you can achieve a cutting circle of 45 cm. With the built-in thicket knife, there is a cutting width of 25.5 cm. Innovation Grass Tangle Protection: With common brush cutters, there is a gap between angle gear and thread spool. This gap is often several millimetres in size. Grass blades like to get tangled here, especially when cutting higher grass. This grass is difficult to remove from the gap, especially when dry. If you do not remove it at all during cleaning, the tangled grass in the gap can even lead to a device defect when operated again. IKRA innovative grass tangle protection prevents grass blades from tangling. The angle gear closes exactly with the thread spool, so that no gap remains where grass could get caught or tangled. The powerful 2-stroke engine with 42.7 cm³ displacement and 1.1 kW power trims weeds, scrub and grass reliably and powerfully. With the powerful petrol brush cutter, you can handle grass blades and woody weeds particularly effectively. The petrol trimmer can be started quickly and easily with the pulley. The motorised brush cutter is equipped with a choke lever and a primer. The choke is the starter lever. The primer is a petrol pump (rubber pump), which pumps petrol into the pipes before starting by pressing it. The fuel tank holds a volume of 960 ml. For best results, use normal, unleaded petrol mixed with a special 2-stroke engine oil. The mixing ratio is 40:1. This means that you mix a litre of petrol with 25 ml 2-stroke oil for the operation of the petrol brush cutter. Thanks to the double-bearing crankshaft, the brush cutter runs much quieter and is also less wear-resistant. The chrome-plated cylinder and rigid chrome plated drive shaft make the device more durable. The air filter can be changed without tools. The filter can therefore be replaced without the aid of additional tools. The fuel-powered brush cutter is particularly light and vibrantly guided thanks to the ergonomic and handy bike handle and the included double shoulder strap. The carrying strap fixes the brush cutter securely to the body. The working comfort is noticeably increased by the shoulder strap. You have better control over the petrol brush cutter thanks to the carrying strap. The shoulder strap can be easily fixed to the device with a carabiner hook. The carrying strap is adjustable. It can be adjusted to individual needs, such as body size. Thanks to the practical bike handle, the motor trimmer can be safely controlled and guided when cutting grass or brush. The controls such as ignition switch, throttle lever and lock button are ergonomically placed on the right handle of the bike handle. The aluminium bike handle is height adjustable. After you have completed the work with the grass trimmer, you can easily divide the robust aluminium tube thanks to the quick release and store it to save space. The aluminium tube has a diameter of approx. 26mm The tube thickness ensures high stability and reduced vibration when working with the brush cutter. For example, garage, basement or gazebo or garden sheds are recommended as storage locations.