ZAMEL Etero rws D/N Solo 2-Channel rws Remote Power Switch 211D/N without Pilot

The RWS Remote Power Switch 211J, RWS – 211D & RWS/211 °C and receiver of the extra free system and for greater loads. The maximum load for relay for these devices output: 16 A/250 V AC. It is also possible to in depending on the type of switch used a (RWS 211J), 2 (RWS 211D) or four (RWS 211 °C) circuits independently to control. This is ideal for use in the control of Gerätegruppen, such as lighting, heating, ventilation, air conditioning, pumps, GATES. A hermetically Verschlossenes housing the protection class IP56 allows you to an indoor or outdoor use. The weather-resistant to ensure proper functioning by means of its overall service life. A power supply with 230 V AC, the simple installation and a further applications additional advantages of the above are switch. Symbol: RWS 211D/N; Nominal input voltage: 230 V AC voltage range: -15% ÷ + 10% Nominal Power Consumption: • 1.15 W – Standby • 2.4 W – Operation; Number of Channels: 2 Max. number of stations: 32 Radio Frequency: Radio frequency 868,32 MHz Radio transmission: A direction encryption: Transmission with addressing range: up to 350 metres in open option to increase the range: Yes – between the transmitter RTN relay contact parameters: 2 x 16 a/250 V AC 4000 VA AC1 contact: 2 x Receiver No potential-free contact mode: Bistable, time time setting for time modes available:: 1 ÷ 120 S – , independent for each channel mount: surface case protection rating: IP56 temperature range: -20 ÷ + 50 °C, protection class: III Dimension: 127 x 120 x 60 mm Weight: 0.41 Kg reference standard: PN EN 60669, PN EN 60950, Pack of en 61000