Mut 703001854 Motorised Ball Valve, 2 WAY, 230 V AC

2 way or 3 way valves TMO are motorized valves used in domestic applications and small plants to control the flow of hot and cold water. Can be connected as zone valves in centralised control installations of heating or cooling. The valve has the function of automatically to intercept the range of fluid carrier distributed to the plant through a shutter ball. The head of the valve is removable without affect the hydraulic system, ensuring a high flexibility and speed for the maintenance of the valve itself. Technical Data Fluid: Water for installations of heating and air-conditioning, treated according to applicable standards can also be used in installations with water health, watertight, Nominal pressure PN 10 max. differential pressure: 250 KPa, a (en 12266 – 1) limit of of the fluid temperature: 5 – 90 °C coefficient of load KVS [M3/h]: 10 (vers. 2-way); 5 (vers. A 3 WAY) Power Supply Voltage: 230 V AC; 50/60Hz operation on/off, with built-in auxiliary: Micro SPST control (with built-in relay) signal of series 3 strand insulation class: II Ref European standard EN60730 switching time: 15 seconds (vers. 2-way); 6 seconds (vers. A 3 WAY) cable length: 1000 mm long of series with quick release type Molex, max. ambient temperature: 60 °C Power consumption: 7 W (Max) reach of auxiliary contacts: 3 (1) A, 250 V ~ degree of protection: IP 40 Ref European standard CEI EN 60529 valve body materials: brass spindle of control: Ball: Chrome Plated Brass Grommets: Teflon sealing o-rings: EPDM lid engine: PA (nylon).