KALEA-INFORMATIQUE PCIe x4 controller card for U.2 NVMe SSDs (U2 68Pin SFF-8639) - 1m cable - LOW AND HIGH PROFILE EQUERS

This card allows you to connect an NVME U.2 to a PCIe 4x, 8x or 16x port. Compatibility: Supports all current 2.5 inch U2 SSDs (e.g. Intel DC P3500/P3600/P3700, Samsung XS1715, OCZ Z-drive 6000, HGST Ultrastar SN100 etc.) for PCIe 4x port (4x, 8x, 16x compatible) Specifications: PCIe 4x3 0 (also possible with older PCIe standards, but throughput will be lower, see below). miniSAS connector SFF-8643 (V 3.5) on the PCIe card, connect to SSD U.2 via a SFF-8643 / SFF-8639 cable. Maximum data rate 32 Gbps at PCIe 3.0 / 16 Gbps at PCIe 2.0 / 8 Gbps at PCIe 1.0. The operating system must support U2 SSDs (Win 10, Win 8, Win 7 64 bit). ATTENTION: Not all BIOS support U.2 drives in NVMe format, you need a BIOS with UEFI. In addition, U.2 SSDs often require software installation: contact your SSD's manufacturer to be sure. Compatible with all 2.5" NVMe U.2 SSDs that use the SFF-8639 interface. Power the U.2 drive via the PCIe connector AND the 15-pin SATA power connector (the power supply via the PCIe port alone is not sufficient). Does not require drivers, works transparently for the operating system. The PCIe card comes with high profile angle and low profile angle. .