Trustleaf 3mm Birch Plywood A4-300x210x 3mm - (Pack of 2) - Laserable Low Fume E1 Glue Ply

High Quality 300mm x 210mm x 3mm Birch Plywood Boards (approximately A4) Cut to a tolerance of +/- 2mm though to be honest we would be unhappy if our digitally controlled laser guided saw was ever out by more than a millimetre Every board is hand inspected prior to packing. Some boards may have plugs where knots have been replaced but we GUARANTEE that at least one side is plug free. Grade B ply can, technically, have open knots up to 6mm on one or both sides. Again we GUARANTEE that neither side will have open knots. Ply can be susceptible to warp, especially thinner ply. Mild warp can be controlled by placing a heavy weight on the board and leaving for a while, or you can wet the concave side of the board with a spray of some hot water and put that side down with a heavy weight on the board for a day or so. Again if the warp was pronounced we would reject the board at the packing stage. Do please bear in mind Birch Plywood is a natural product and there may be some variation to the colour of the boards and even the colour on the face of the board that can in some unusual cases have an almost two-tone effect. There may also be some minor blemishes, we cannot police that. Finally while the board is sourced from Abroad all the cutting sorting preparation and packing is done by people here in the UK. We also sell this item in other sheet sizes and quantities. Visit our Amazon Store for details