FAMEX Famex Torque Spanner 12.5 mm (1/2 Inch Drive 40 – 210 Nm Qty 1 10865

Famex 10865 torque wrench, 12.5 mm (1/2 inch) drive, 40-210 Nm. Torque wrench in particularly high quality for the discerning user: Measuring range: 40-210 Nm. For measurement in right and left-hand operation For controlled tightening and loosening of screw connections. In accordance with DIN ISO 6789. Tolerance according to DIN ISO 6789 only +/- 3%. Carefully calibrated. Each torque wrench is additionally tested. Supplied with calibration certificate for legal operation Areas of use: - Working on cars. Cars, SUVs, vans, vans. - The measuring range of the torque wrench covers the common tightening torques for wheel bolts on cars, vans and vans. Function: - The achieved torque is displayed audible and tangible. - With reversible ratchet for more comfortable handling. - With quick locking of the set torque value. - The torque wrench is designed for right and left-hand operation. - With quick-release / locking mechanism for the attached tool. Features: - With detailed instruction manual (English language not - Supplied with calibration certificate. - In robust plastic case. Quality: Each of these torque wrenches 10865 is subjected to additional quality and function control before delivery: After calibration in production, every single torque wrench is tested at FAMEX a second time. This test is carried out on a separate test unit using high-quality electronic testing equipment from the manufacturer Norbar. It is done to eliminate calibration errors in production due to human errors, faulty or incorrectly adjusted calibration devices. This quality initiative is the answer to the large number of incorrectly measuring and therefore dangerous torque wrenches on the market. FAMEX torque wrenches are therefore slightly more expensive than the countless offers in the low price segment, but Famex is convinced that this is the only way to ensure flawless product quality. Please keep in mind that incorrect calibration or quality fluctuations in the mechanics can cause large deviations from the set value. Such a malfunction cannot be detected by the user. Even deviations of 20% are not detectable by the user according to our experience. Please note: All FAMEX torque wrenches 10865 have a serial number. Dimensions: Torque wrench length: approx. 47 cm This could be interesting for you: Famex 10869 torque wrench 20-110 Nm right/left measurement. Famex 10872 torque wrench 6 - 30 Nm right/left measurement. FAMEX 10896 Torque Wrench/Screwdriver 1-8 Nm, for Right and Left Measurement Important instructions for handling the torque wrench: The torque wrench is a measuring tool, please do not use it to tighten above the maximum setting value, nor to loosen fixed screws beyond the highest setting value. When the click signal sounds, the screwing process must be stopped immediately. Please make sure that the locking sleeve is unlocked when adjusting. After adjusting the desired torque value, move the locking sleeve to the locked position. Adjusting the high torque values tends to require a higher effort. This is due to the design, as the spring mechanism in the wrench must be more pre-tensioned at higher torques. For further instructions and tips on setting and use, please refer to the enclosed instruction manual (English language not guaranteed). Only the instruction manual enclosed with the key applies to this torque wrench. Other, also very similar looking torque wrenches have a different mechanism and a different adjustment system that does not apply to this Famex torque wrench.