KS TOOLS KS Tools 1503524 Hammer of Device

Tools: High quality drill bit countersink set with pivoted brass depth stop. Pre-drill adjustable in the drilling depth. Countersink angle 60 degrees Material: High-quality carbide tipping HS u. VS speed: 1800 - 5000 min-1 Application: The set is particularly well suited for drilling screw holes in the decking boards and sinking them cleanly and precisely. The pivoted depth stop stops when it hits the workpiece and therefore does not leave any marks on the material. Tip: Set the drilling depth so that the board is drilled through (board thickness). This is how the self-tapping terrace screw can find an optimal hold. High-quality drill and countersink set with pivoted depth stop made of brass. Pre-drill adjustable in the drilling depth. Countersink angle 60 °. Countersink / pre-drill: Alloyed tool steel. Depth stop: brass. 1500-2200 min-1, e.g. B. Guide value approx. 1800 min-1 in hardwood. The set is particularly well suited for drilling screw holes in the decking boards and countersinking them cleanly and precisely. The pivoted depth stop stops when it hits the workpiece and therefore does not leave any marks on the material. The drilling depth is to be set so that the board is drilled through (board thickness). In this way, the self-tapping terrace screw can find an optimal hold. Set of 4, 5 and 6 mm drill bits and countersinks with depth stop in a wooden case