Schellenberg 50810 Insect Protection Sliding Window with Roller Shutters - Grey

Are you looking for an insect protection which is not permanently mounted, that can be attached and removed with a few simple steps - as often as you want? Then the Schellenberg sliding window optimally meet your needs: 1. if you wish to use your roller shutter to the provide shade and privacy, and thereby aim to be reliably protected against insects 2. if you want an insect protection that is mounted only when it's needed ... then the sliding window from Schellenberg is precisely what you need! The insect protection can be attached and removed to and from the window at any time with a few simple actions. To do this, it is simply pushed between the guide rails of the roller shutter, and the roller shutter then lowered down to the height of the sliding window. Within 15 seconds, you will then have a reliable insect and sun screen. Enjoy the fresh night-time air trouble-free! Pesky insects, mosquitoes, flies and other vermin are kept outside! • Dimensions: 75 x 50 cm • extendable to 142 x 50 cm Advantages • ensures an optimum combination of shading and insect protection in combination with a roller shutter • enjoy the fresh night-time air trouble-free • mobile insect protection, just the way you want it • Assembly in 15 seconds: just slide between the rails of the roller shutter • no assembly of the sliding window necessary • Installation is possible without drilling • circumferential brush seal against crawling animals • High-quality aluminium profile (diameters: 19 x 8 mm) • Fabric made of high quality fiberglass in anthracite (for an optimal see-through capability) • UV stabilised and washable Areas of application • reliable protection from insects, mosquitoes, flies and other vermin • ensures an optimum combination of shading and insect protection in combination with a roller shutter • ideal for night-time airing • can only be used in conjunction with a roller shutter Technical data • Dimensions, completely pushed together: 75 x 50 cm • Dimensions, completely extended: 142 x 50 cm • Fabric: fiberglass in anthracite • Frame: white aluminium • Profile diameters: 19 x 8 mm Installation notes 1. Position the insect protection sliding window onto the window sill between the two guide rails of the roller shutter 2. Extend the insect protection sliding window as far as possible 3. Please take into account: The sliding window should reach into the guide rails of the roller shutter far enough, until it cannot be extended on both sides any further. 4. Slowly lower the roller shutter until the roller shutter end bar rests on the upper edge of the sliding window without any clearance. Important note: Please be sure to stop the roller shutter by hand, if you are operating your roller shutter motorized without an obstacle detection. For roller shutters with automatic controllers, the automatic feature should be disabled. Scope of delivery • 1 insect protection sliding window