Design Engineering Titanium 6" x 100' Exhaust Heat Wrap with Lava Rock Technology - Heat Wrap for Exhaust Pipes, Pliable Exhaust Wrap Tape, Withstands 1800°F Direct Heat & 2500°F Intermittent Heat

Design Engineering Titanium exhaust wrap, with Lava Rock Technology, is made from pulverized lava rock and stranded into a fiber material and woven into a proprietary weave. Titanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability. Titanium wrap withstands 1800 degrees Fahrenheit direct heat and 2500-degree intermittent heat. It promotes increased flow for improved performance while reducing temperature and vibration breakdown. Perfect for any automotive or motorcycle application. Note of Caution: Wrap is not designed to be removed after it has been through heat cycles. After the fibers have been heated they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. Design Engineering Hi-Temp Silicone Coating spray is NOT recommended for DEI Titanium wrap. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping Titanium exhausts. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. By wrapping the exhaust, the additional heat can make the titanium alloy turn brittle and prone to premature cracking. DEI recommends using alternatives such as their flexible heat shields when seeking to reduce the heat on titanium exhaust systems.