Alberts GAH-Alberts 213800 H-Post Base Hot-dip Galvanised, Total Height: 800 mm, Material Thickness: 8 mm lichte Breite: 161 mm

H-post supportgalvanised steelOverall length: 800 mmWidth: 161 mmDepth: 80 mmLength of the upper flap: 400 mmMaterial thickness: 8.0 mmNumber of holes: 4Hole-diameter: 13 mmConcreting in gives H-post supports particularly good grip and, depending on the design, makes them particularly well suited for static heavy and high wooden structures (e.g. carports and fences). When concreting, care should be taken to ensure that, with a H-post support, the upper flap is concreted in to a minimum depth of 3 cm.During installation, ensure that the posts are not seated directly on the post support plate, but are mounted at a distance of about 1 cm from it. This ensures that the timber is adequately ventilated and no damp spots arise. To achieve this, it is possible to place a wooden shim approximately 1 cm thick under the post during assembly. After screwing the post into the support, the shim can be removed.