H&R DR-System Wheel spacer set 30mm per axle - Bolt pattern 5x120 - Hub 74,0mm - Bolt size M12x1,5 - compatible with BMW

H&R TRAK+ wheels spacers provide a sporty look of your vehicle and can be used as well with serial - as also with special wheels. Via complex testing / road testing arranged with the TUV the technically possible wheels spacing for the concerned vehicle is identified. During construction-tries in the house of H&R the regulations for the components certificate or for the ABE are specified. With serial rims the mounting of the H&R TRAK+ wheels spacers improve not only the optic, but also the driving performance.The same certainly deems to use of special wheels, which in this way get an even wider lane. With H&R TRAK+ wheels spacers the wheels can be put into the wheel housing exactly. H&R TRAK+ wheels spacers are available in various models as well as in various width from 6 up to 100mm per axis. Through the delivered instruction manual H&R TRAK+ wheels spacers are mounted quickly and without causing any problems. All H&R TRAK+ wheels spacers are made in Germany! Technical data: Broadening per axis: 30mm (15mm per site). Bolt-hole: 5/120 Hub centring: 74,0mm Thread: M12x1,5 Attaching: screws System: DR The wheels spacers are attached with the help of appropriately longer wheel bolts (NOT in scope of delivery). TUV-report: Vehicle-specific TUV-reports, respectively reports about the Structural Durability of these wheels spacers you find on the H&R-homepage for free download if you type the H&R article-number: 3075740. In scope of delivery: 1 pair (2 pieces for one axis). BMW 5/D (E39) Hint(s): 3 BMW M539 Hint(s): 3 BMW X5 M type M7X Hint(s): 3 BMW X5 type X70 Hint(s): 3 BMW X6 M type M7X Hint(s): 3 BMW X6 type X70 Hint(s): 3