STAR BRITE Heavy Duty Boat Bottom Cleaner - Remove Deposits, Scum Lines & Rust Stains Quickly & Easily from Boat Hull - Safe for Fiberglass, Wood, Iron & Painted Surfaces

Star Brite Boat Bottom Cleaner is a must-have for every boat owner. Its acid-based formula is designed to tackle the toughest stains and grime, ensuring your boat's hull remains in pristine condition. With Star Brite, you can say goodbye to stubborn alkali water rings and yellow build-up that have been plaguing your boat for years. This powerful cleaner works effortlessly, eliminating the need for strenuous scraping or elbow grease. However, due to its potent formula, it's crucial to wear protective gear when using Star Brite Boat Bottom Cleaner. This product is very caustic and can cause skin irritation. Therefore, it's recommended to use specific cleaning devices and follow proper disposal practices to ensure safety. Star Brite Boat Bottom Cleaner - because your boat deserves nothing but the best. DIRECTIONS: Remove the boat from water. Allow deposits and stains to dry thoroughly. Stains and deposits found above the waterline may be removed while boat is in water. Apply product to the dry surface of hull using an all-plastic sprayer, non-nylon roller or brush. Keep deposits and stains wet and foaming with the product. Foaming indicates the product is removing the deposits. Reapply as needed to maintain foaming action. After 10 minutes of foaming action, most surfaces should be clean and ready for rinsing with water. Heavy deposits may require several applications and light scraping. If sprayer is used, pump fresh water through before storing. Directions Remove boat from water. Allow deposits and stains to dry thoroughly. Stains and deposits found above the water line may be removed while boat is in water. Apply product to the dry surface of hull using an all-plastic sprayer, non-nylon roller or brush. Keep deposits and stains wet and foaming with the product. Foaming indicates the product is removing the deposits. Reapply as needed to maintain foaming action. After 10 minutes of foaming action, most surfaces should be clean and ready for rinsing with water. Heavy deposits may require several applications and light scraping. If sprayer is used, pump fresh water through before storing.