Ronseal Diamond Hard Floor Varnish Clear Satin 2.5L

Ronseal Diamond Hard floor varnish is ideal for any wooden floor. It provides protection against heavy foot traffic, knocks, scuffs, scratches and its non-yellowing formulation enhances the natural beauty of the wood. Touch dry in 30 minutes, it means your floor is back in use as soon as possible. Ideal for use on any type of wooden floor especially in areas subject to heavy foot traffic and has the following specifications: 8m² per litre Areas of use: Wooden floors Coverage: 20m2 covered per litre Number of coats: 3 Finish: Gloss and Satin Application: Brush Drying time: 30 mins Protection level: Very high The Ronseal RSLDHFVS25L Diamond Hard Floor Varnish comes in the following: Finish: Satin Size: 2.5 Litre It does what it says on the tin Their aim at Ronseal is always to provide products that meet exactly your requirements; that is why they spend a lot of time listening to what you have to say. They then take that feedback into their R & D Laboratories, and using the very latest technological advancements, they can then deliver innovative new products and the quality service for your DIY and project needs. This is an ongoing process and, coupled with their no-nonsense advertising and marketing, and their extensive consumer education, these innovative new product developments will continue to help them lead in their product categories, meeting and exceeding your requirements in the future. Directions 1. Prepare the wooden floor surface by sanding and cleaning. 2. Apply the first coat of varnish using a brush, ensuring even coverage. 3. Allow the first coat to dry for 30 minutes (touch dry) and 2 hours for a second coat. 4. Apply a second and third coat, allowing the same drying times between coats. 5. Ensure the area is well-ventilated as the product is water-based but has low VOC.