Blumat Automatic watering system 3m starter kit

Starter kit for watering a balcony box system with 3 boxes, but suitable for any automatic watering of potted plants or not too large pot plants on balconies and terraces, plants in the conservatory or greenhouse or small beds (borders) in front of the house. Drip Blumat require pressure, they are either connected to the water pipe via a pressure reducer via an 8 mm supply hose or supplied with a high tank that stands at least 1 m higher. The watering water comes from a drop by drop hose (drip hose), which is automatically opened and closed from the watering head of the drip Blumat depending on the moisture requirements of the plants (without computer or electrical connection). Prerequisite for this sensor function is the water filling of the drip Blumat including the porous clay cone. For the respective design of an irrigation system as a rule: 4 drip Blumat (4 drip points) per 1 m box, 3 drip Blumat per 0.8 m box or 1 drip Blumat for containers up to 25 cm diameter. The connection to the high tank is provided as a water supply for this set. For the recommended connection to the tap, the pressure reducer is also required (item No.36001) Box contents: 12 Drip Blumat (including drip hose and T-piece), 7 m supply hose, 1 angle, 1 end piece, 1 hose junction, 1 T-piece, 1 hose connection, 1 high tanner connection. Safety Warning Always connect the kit to a water source using a pressure reducer or a high tank at least 1 meter higher to prevent potential hazards. Ensure the drip Blumat is properly filled with water including the porous clay cone for the sensor function to work correctly. Box Contains Drip Flower 3 m Starter Kit