Tribological Studies on Aluminum-Based Particulate Reinforced MMCs: Literature Review, Fabrication, Physical, Mechanical and Tribological Studies of Aluminum based Metal Matrix Composites - Image 1

£64.00

It has never been this cheap. We have no record of a lower price.

£64 today · cheaper than every other day in the last 3 months

LAP Lambert Academic Publishing Tribological Studies on Aluminum-Based Particulate Reinforced MMCs: Literature Review, Fabrication, Physical, Mechanical and Tribological Studies of Aluminum based Metal Matrix Composites

Name: Tribological Studies on Aluminum-Based Particulate Reinforced MMCs: Literature Review, Fabrication, Physical, Mechanical and Tribological Studies of Aluminum based Metal Matrix Composites
Brand: LAP Lambert Academic Publishing
Price: 64.0 GBP
Availability: InStock

Engineering & Technology

Price data last checked 36 day(s) ago - refreshing...

View at Amazon

We'll watch every seller, every day. One email when your price arrives.

Grey patches = out of stock. Cheaper = lower on the chart. Hover for exact prices.

Last 55 days · 55 data points (no recent data)

Historical

Generating forecast…

View at Amazon ↗

Engineering & Technology

Price data last checked 36 day(s) ago - refreshing...

NEW HERE?

Amazon shows you one price. We show you all of them.

Tosheroon watches Amazon prices so you don't have to. Every product on Amazon has a price history — we make it visible. Set the price you'd actually pay, and we'll email you the second it gets there. No app, no account, one email.

WHAT'S ON THIS PAGE

↑ Price chart
when this has been cheap or pricey

↑ Forecast
where the price is heading next

↓ Statistics
all-time high & low, recent range

↑ Price alert
name your number, we'll email you

Price Distribution

Price distribution over 55 days • 1 price levels

Days at Price

Price Analysis

Most common price: £64 (55 days, 100.0%)

Price range: £64 - £64

Price levels: 1 different prices over 55 days

Description

Aluminum (Al) Metal Matrix Composites (MMCs) are being used in place of cast iron and steel in automobile, mining and mineral sectors due to their lightweight and high strength. In automobile, aerospace, mining and mineral sectors, there exist situations where two mating parts are in sliding contact with each other. Due to the relative motion, there is an inevitable loss of material. In certain situations, if the extent of material is beyond a critical limit, there are possibilities of catastrophic failure of the components. Wear is a complex phenomenon and the most important reason for the damage and consequent failure of machine parts. This book describes the extensive literature review of the various researchers work on the studies of Al-MMCs. Further, the fabrication of MMCs, of Al6061-SiC, Al6061- Al2O3, Al7075-SiC and Al7075-Al2O3 MMCs. The composites were developed by liquid metallurgy technique via stir casting method which is economical. The fabricated MMCs were subjected to various studies like physical, mechanical and tribological properties along with the OM and SEM studies on the alloys and composites. The obtained results of the MMCs were presented and discussed.

Product Specifications

Brand: LAP Lambert Academic Publishing
Format: paperback
ASIN: 6200250960
Category: Books > Subjects > Science, Nature & Maths > Engineering & Technology
Domain: Amazon UK
Release Date: 22 August 2019
Listed Since: 16 September 2019

Barcode

No barcode data available

It has never been this cheap. We have no record of a lower price.

LAP Lambert Academic Publishing Tribological Studies on Aluminum-Based Particulate Reinforced MMCs: Literature Review, Fabrication, Physical, Mechanical and Tribological Studies of Aluminum based Metal Matrix Composites

Price Distribution

Price Analysis

Description

Product Specifications

Barcode

Similar Products You Might Like

Machining of Metal Matrix Composites

Metal Matrix Composites: Properties and Applications

Friction Stir Welding of Dissimilar Age-Hardenable Aluminium Alloys: An Experimental and Optimizational Investigation between AA6061-T651 and AA7075-T651

Studies of corrosion behaviour of aluminium 6061 / quartz composites

EXPERIMENTAL INVESTIGATIONS ON ALUMINIUM COMPOSITES: EXPERIMENTAL INVESTIGATIONS ON WEAR AND MACHINING CHARACTERISTICS OF ALUMINIUM HYBRID COMPOSITES

Carbon Nanotubes (CNTs): Reinforced Aluminium Matrix Nano-Composites: Development and Characterization

Metal and Ceramic Matrix Composites (Series in Materials Science and Engineering)

Development of technologies for production of wear-resistant alloys of a new generation

The wear behavior of heat treated Aluminum bronze matrix composite

Lama vermelha reforçada com partículas de ALUMÍNIO 6061 compósitos de matriz metálica: Estudos de corrosão e propriedades mecânicas

DEVELOPMENT OF AL-BASED METAL MATRIX COMPOSITES: Reinforced with Hybrid Nanoparticles and its Machinability Test

Production of Al based composites reinforced with embedded NiTi by FSW

On Polymer/Nano-particle Composites: Characterization and Numerical Modeling of Mechanisms about Fracture Toughness and Fatigue Resistance of Epoxy/Nano-silica/Nano-rubber Composites

Aluminum and Magnesium Metal Matrix Nanocomposites (Engineering Materials)

Aluminium Materials Technology for Automobile Construction

Introduction to Metal Matrix Composites: Fabrication and Recycling

Metal Matrix Composites

Zashchitnye pokrytiya s metallicheskimi poroshkami na osnove polimera Na-KMTs: Formirovanie struktury i svoystv karboksimetiltsellyuloznykh pokrytiy s metallicheskimi poroshkami

Introduction Metal Matrix Composits (Cambridge Solid State Science Series)

Metal-Matrix Composites Innovations, Advances and Applications: An SMD Symposium in Honor of William C. Harrigan, Jr. (The Minerals, Metals & Materials Series)

Green Materials and Advanced Manufacturing Technology: Concepts and Applications (Green Engineering and Technology)

A Effect of SiC on Fatigue Characteristics of Al-SiC Metal Matrix: Investigation on Effect of SiC Particulates on Fatigue behavior of Al-SiC

Seryy chugun obrabotannyy ligaturami, soderzhashchimi RZM i ShchZM: Seryy chugun obrabotannyy ligaturami, soderzhashchimi redkozemel'nymi i shchelochnozemel'nymi metallami

Innovative Friction Stir Welds of Aluminium Alloys Characterizations: FSW of Aluminium Alloys: Tool Design Mechanical Integrity Failure Analysis Microstructures Material Flow Residual Stress

It has never been this cheap. We have no record of a lower price.

LAP Lambert Academic Publishing Tribological Studies on Aluminum-Based Particulate Reinforced MMCs: Literature Review, Fabrication, Physical, Mechanical and Tribological Studies of Aluminum based Metal Matrix Composites

Price History & Forecast

Price Distribution

Price Analysis

Description

Product Specifications

Barcode

Similar Products You Might Like

Machining of Metal Matrix Composites

Metal Matrix Composites: Properties and Applications

Friction Stir Welding of Dissimilar Age-Hardenable Aluminium Alloys: An Experimental and Optimizational Investigation between AA6061-T651 and AA7075-T651

Studies of corrosion behaviour of aluminium 6061 / quartz composites

EXPERIMENTAL INVESTIGATIONS ON ALUMINIUM COMPOSITES: EXPERIMENTAL INVESTIGATIONS ON WEAR AND MACHINING CHARACTERISTICS OF ALUMINIUM HYBRID COMPOSITES

Carbon Nanotubes (CNTs): Reinforced Aluminium Matrix Nano-Composites: Development and Characterization

Metal and Ceramic Matrix Composites (Series in Materials Science and Engineering)

Development of technologies for production of wear-resistant alloys of a new generation

The wear behavior of heat treated Aluminum bronze matrix composite

Lama vermelha reforçada com partículas de ALUMÍNIO 6061 compósitos de matriz metálica: Estudos de corrosão e propriedades mecânicas

DEVELOPMENT OF AL-BASED METAL MATRIX COMPOSITES: Reinforced with Hybrid Nanoparticles and its Machinability Test

Production of Al based composites reinforced with embedded NiTi by FSW

On Polymer/Nano-particle Composites: Characterization and Numerical Modeling of Mechanisms about Fracture Toughness and Fatigue Resistance of Epoxy/Nano-silica/Nano-rubber Composites

Aluminum and Magnesium Metal Matrix Nanocomposites (Engineering Materials)

Aluminium Materials Technology for Automobile Construction

Introduction to Metal Matrix Composites: Fabrication and Recycling

Metal Matrix Composites

Zashchitnye pokrytiya s metallicheskimi poroshkami na osnove polimera Na-KMTs: Formirovanie struktury i svoystv karboksimetiltsellyuloznykh pokrytiy s metallicheskimi poroshkami

Introduction Metal Matrix Composits (Cambridge Solid State Science Series)

Metal-Matrix Composites Innovations, Advances and Applications: An SMD Symposium in Honor of William C. Harrigan, Jr. (The Minerals, Metals & Materials Series)

Green Materials and Advanced Manufacturing Technology: Concepts and Applications (Green Engineering and Technology)

A Effect of SiC on Fatigue Characteristics of Al-SiC Metal Matrix: Investigation on Effect of SiC Particulates on Fatigue behavior of Al-SiC

Seryy chugun obrabotannyy ligaturami, soderzhashchimi RZM i ShchZM: Seryy chugun obrabotannyy ligaturami, soderzhashchimi redkozemel'nymi i shchelochnozemel'nymi metallami

Innovative Friction Stir Welds of Aluminium Alloys Characterizations: FSW of Aluminium Alloys: Tool Design Mechanical Integrity Failure Analysis Microstructures Material Flow Residual Stress