Gas Turbine Tip Leakage Flow and Heat Transfer: Tip Leakage Flow Characteristics and Heat Transfer on Turbine Blade Tip and Casing - Unsteady Stator-Rotor Interaction - Image 1

£60.00

LAP Lambert Academic Publishing Gas Turbine Tip Leakage Flow and Heat Transfer: Tip Leakage Flow Characteristics and Heat Transfer on Turbine Blade Tip and Casing - Unsteady Stator-Rotor Interaction

Name: Gas Turbine Tip Leakage Flow and Heat Transfer: Tip Leakage Flow Characteristics and Heat Transfer on Turbine Blade Tip and Casing - Unsteady Stator-Rotor Interaction
Brand: LAP Lambert Academic Publishing
Price: 60.0 GBP
Availability: InStock

Engineering & Technology

Price data last checked 22 day(s) ago - will refresh soon

View at Amazon

We'll watch every seller, every day. One email when your price arrives.

It has never been this cheap. We have no record of a lower price.

£60 today · cheaper than every other day in the last 3 months

NEW HERE?

Amazon shows you one price. We show you all of them.

Tosheroon watches Amazon prices so you don't have to. Every product on Amazon has a price history — we make it visible. Set the price you'd actually pay, and we'll email you the second it gets there. No app, no account, one email.

WHAT'S ON THIS PAGE

↓ Price chart
when this has been cheap or pricey

↓ Forecast
where the price is heading next

↓ Statistics
all-time high & low, recent range

↑ Price alert
name your number, we'll email you

Price History & Forecast

Grey patches = out of stock. Cheaper = lower on the chart. Hover for exact prices.

Last 69 days · 69 data points (no recent data)

Historical

Generating forecast…

Price Distribution

Price distribution over 69 days • 1 price levels

Days at Price

Price Analysis

Most common price: £60 (69 days, 100.0%)

Price range: £60 - £60

Price levels: 1 different prices over 69 days

Description

One of the most critical components of gas turbine engines, rotor blade tip and casing, is exposed to high thermal load. It is a significant challenge to the designer to protect the turbine material from this severe situation. A single stage gas turbine engine was modeled and simulated using commercial CFD solver ANSYS CFX R.11. The modeled turbine stage has 30 vanes and 60 blades with a pressure ratio of 3.2 and a rotational speed of 9500 rpm. The predicted isentropic Mach number and adiabatic wall temperature on the casing showed good agreement with available experimental data under the close operating condition. The effects of tip clearance heights and rotor speeds have also been analyzed and compared one with respect to others. Same typical patterns of leakage flow structures and heat transfer rate distribution can be obtained in both steady and unsteady simulations. However, steady simulation underpredicted the highest heat transfer rate. Because it couldn't capture the critical local high heat transfer phenomena caused by the unsteady stator-rotor interactions.

Product Specifications

Brand: LAP Lambert Academic Publishing
Format: paperback
ASIN: 3844385630
Category: Books > Subjects > Science, Nature & Maths > Engineering & Technology
Domain: Amazon UK
Release Date: 06 June 2011
Listed Since: 08 June 2011

Barcode

No barcode data available

LAP Lambert Academic Publishing Gas Turbine Tip Leakage Flow and Heat Transfer: Tip Leakage Flow Characteristics and Heat Transfer on Turbine Blade Tip and Casing - Unsteady Stator-Rotor Interaction

It has never been this cheap. We have no record of a lower price.

Price History & Forecast

Price Distribution

Price Analysis

Description

Product Specifications

Barcode

Similar Products You Might Like

Heat transfer and emissions characteristics of impinging flame jets: Methods, Materials and Applications

Turbine Blade Erosion and the Use of Wind Protection Tape: Erosion and Protection of Wind Turbine Blades

Analysis of Bearing Support System of a Steam Turbine: A Solid Modeling Approach

The Theory Of Micro-Polar and Couple Stress Fluid Flows

A Steady State Subchannel Heat Transfer Code for Plate Fueled Reactors

Strut Design For Contra Rotating Turbine: An innovative turbine component design

Stopped Flow Kinetics for Evaluation of Stability Constant

Some Hydrodynamic and Hydromagnetic unsteady Flows: Flows Past Plates and in Channels

Computational models for GTA and laser welding processes: Finite element based heat transfer and fluid flow model

Nonlinear Bluff-Body Aerodynamics: Analysis, Modeling and Applications

Modeling of Solid-fluid Interactions in Inclined Open Channels: Modeling of Flowing Film Concentrators

Snizhenie vrednykh vybrosov dizel'nykh dvigateley

Managing Liquid Loading in Gas Wells

Entropy Generation Analysis in Convective Fluid Flow

Engineering Design Of Oil And Gas Pipelines

Yarn Formation in Friction Spinning

A Study of Free/Forced Convection Flow Problems of Fluid Dynamics

Quantifying and Mitigating Wind Power Variability

Nanofluids Properties and Their Applications: Experimental and Theoretical Studies

Nerazrushayushchiy kontrol' i bezopasnost' v energoyemkikh ob"ektakh tekhniki

Dynamics of underground pipeline from the flowing fluid

Characterizing Fatigue Fractures in EB Welded Gas Turbine Materials: Two Complete Case Studies – Inconel 718 and Waspaloy Compressor Disk Materials

Heteroclinic cycles in thermal convection models: Bifurcation analysis and numerical investigations

Teplonapryazhennye detali forsirovannykh transportnykh dizeley.: Metody i rezul'taty issledovaniya temperaturnykh poley, svoystv motornogo masla i uskorennykh ispytaniy golovok tsilindrov.