Springer Power Theories for Improved Power Quality: 1 (Power Systems, 1)

Power quality describes a set of parameters of electric power and the load’s ability to function properly under specific conditions. It is estimated that problems relating to power quality costs the European industry hundreds of billions of Euros annually. In contrast, financing for the prevention of these problems amount to fragments of these costs. Power Theories for Improved Power Quality addresses this imbalance by presenting and assessing a range of methods and problems related to improving the quality of electric power supply.Focusing particularly on active compensators and the DSP based control algorithms, Power Theories for Improved Power Quality introduces the fundamental problems of electrical power. This introduction is followed by chapters which discuss:  ‘Power theories’ including their historical development and application to practical problems,  operational principles of active compensator’s DSP control based algorithms using examples and results from laboratory research, and  the key areas of application for these methods and suggested practical solutions. Power Theories for Improved Power Quality is a key study resource for students in engineering and technical degrees as well as a reference for professional and practitioners in the electrical energy sector working with power quality. From the Back Cover Power quality describes a set of parameters of electric power and the load’s ability to function properly under specific conditions. It is estimated that problems relating to power quality costs the European industry hundreds of billions of Euros annually. In contrast, financing for the prevention of these problems amount to fragments of these costs. Power Theories for Improved Power Quality addresses this imbalance by presenting and assessing a range of methods and problems related to improving the quality of electric power supply.Focusing particularly on active compensators and the DSP based control algorithms, Power Theories for Improved Power Quality introduces the fundamental problems of electrical power. This introduction is followed by chapters which discuss: •‘Power theories’ including their historical development and application to practical problems, •operational principles of active compensator’s DSP control based algorithms using examples and results from laboratory research, and •the key areas of application for these methods and suggested practical solutions. Power Theories for Improved Power Quality is a key study resource for students in engineering and technical degrees as well as a reference for professional and practitioners in the electrical energy sector working with power quality. About the Author Professor Marian Pasko obtained his D.SC. degree in 1994 from the Faculty of Electrical Engineering at the Silesian University of Technology, defending a thesis titled: “Selection of compensators to optimize the working conditions of one-phase and multi-phase voltage sources with periodical non-sinusoidal waveforms“. The primary areas of his research are issues related to improving the power quality of electric systems operating in conditions of deformation of voltages and currents. His most important achievements include:   optimization of working conditions of the non-sinusoidal periodic real voltage source by means of LC one-ports;   application of LC one-ports in phase load symmetrization in n-phase systems with non-sinusoidal periodical waveforms; and   design of LC compensator synthesis algorithm. Dr Grzegorz Benysek obtained his PhD degree in 1998 from the Electrical Engineering Department at the Technical University of Zielona Góra, defending a thesis titled: "An analysis of hybrid compensator systems for the filtration harmonic current in AC supply networks". On November 16th 2007 he obtained his D.SC. degree from the Faculty of Electrical Engineering, Computer Science and Telecommunications at the University of Zielona Góra, defendi