Trafford Publishing Introduction to Dynamics of Rotor-Bearing Systems

This book is written as an introduction to rotor-bearing dynamics for practicing engineers and students who are involved in rotordynamics and bearing design. The goal of this book is to provide a step-by-step approach to the understanding of fundamentals of rotor-bearing dynamics by using DyRoBeS© . Therefore, the emphasis of this book is on the basic principals, phenomena, modeling, and interpretation of the results. Numerous examples, from a single-degree-of-freedom system to complicated industrial rotating machinery, are employed throughout this book to illustrate these fundamental dynamic behaviors. The concepts in the text are reinforced by parametric studies and numerous illustrative examples and figures. The book begins with a brief discussion of the mathematical modeling of physical dynamic systems and an overview of the basic vibration concepts in Chapter 1. The coordinate systems and the kinematics of the rotor motion are presented in Chapter 2. A simple two-degrees-of-freedom rotor system, the Laval-Jeffcott rotor model, is utilized in Chapter 3 to demonstrate many important phenomena in rotordynamics. This simple 2DOF model provides many valuable physical insights into more practical and complicated systems. Chapter 4 discusses the rotating disk equations and rigid rotor dynamics. Chapter 5 covers the finite element formulation for a rotating shaft element. Chapter 6 deals with various types of bearings, dampers, seals and other interconnection components. All the reaction forces from these components are non-linear in nature. The concept of linearization around the static equilibrium is discussed. Chapter 7 summarizes the lateral vibration study with several practical examples. Various solution techniques and interpretation of the results are discussed. Chapter 8 is devoted to the important subject of torsional vibration. Finally, a brief description of the balancing method, influence coefficient method is presented in Chapter 9.